CONSTRUCTION JOINTS / SLAB CRACKS

  • CREATE “V” GROOVE TO ½ “ DEPTH AND CLEAN THE 

  • SURFACE WITH CLEANING AGENT.

  • POURING OF PROTEKTA BASE UP TO THE NECK OF THE GROOVE FOLLOWED BY WATER WASHING.

  • POUR ADDITIONAL PROTEKTA BASE AT AREAS WAS INGRESS IS TOO MUCH.

  • REMOVE EXCESS PROTEKTA BASE FROM THE SURFACE AND CLEAN IT AGAIN WITH WIRE BRUSH.

  • BRUSH COAT PROTEKTA FLEXJOINT.

  • PACKING THE GROOVE WITH SILICA SAND MIXED WITH PROTEKTA SEALANT 400 IN THE RATIO OF 1:2 AND BRUSH COAT PROTEKTA FLEXJOINT AT THE SAME AREAS AFTER 24 HRS